Laser-based molecular delivery and its applications in plant science.

Lasers enable modification of living and non-living matter with submicron precision in a contact-free manner which has raised the interest of researchers for decades. Accordingly, laser technologies have drawn interest across disciplines. They have been established as a valuable tool to permeabilize cellular membranes for molecular delivery in a process termed photoinjection. Laser-based molecular delivery was first reported in 1984, when normal kidney cells were successfully transfected with a frequency-multiplied Nd:YAG laser. Due to the rapid development of optical technologies, far more sophisticated laser platforms have become available. In particular, near infrared femtosecond (NIR fs) laser sources enable an increasing progress of laser-based molecular delivery procedures and opened up multiple variations and applications of this technique.This review is intended to provide a plant science audience with the physical principles as well as the application potentials of laser-based molecular delivery. The historical origins and technical development of laser-based molecular delivery are summarized and the principle physical processes involved in these approaches and their implications for practical use are introduced. Successful cases of laser-based molecular delivery in plant science will be reviewed in detail, and the specific hurdles that plant materials pose will be discussed. Finally, we will give an outlook on current limitations and possible future applications of laser-based molecular delivery in the field of plant science.

Experimental verification of high energy laser-generated impulse for remote laser control of space debris.

Walking along a beach one may notice debris being washed ashore from the vast oceans. Then, turning your head up at night you even might noticed a shooting star or a bright spot passing by. Chances are, that you witnessed space debris, endangering future space flight in lower earth orbit. If it was possible to turn cm-sized debris into shooting stars the problem might be averted. Unfortunately, these fragments counting in the 100 thousands are not controllable. To possibly regain control we demonstrate how to exert forces on a free falling debris object from a distance by ablating material with a high energy ns-laser-system. Thrust effects did scale as expected from simulations and led to speed gains above 0.3 m/s per laser pulse in an evacuated micro-gravity environment.

Adaptive optics assisted and optical coherence tomography guided fs-laser system for ophthalmic surgery in the posterior eye.

While fs-lasers are clinically established for surgery in the anterior eye, their use in the posterior eye is impeded by aberrations and focus position errors. We implemented a laboratory system to investigate whether fs-laser surgery in the posterior eye is made more feasible by aberration correction and tomographic image guidance. Aberration correction is obtained by adaptive optics (AO) and the image guidance is accomplished by optical coherence tomography (OCT). System characteristic measurements and cutting experiments were performed inside an eye model. By aberration correction, wavefront errors were reduced from 270 nm root-mean-square (rms) to 64 nm rms, ignoring Zernike terms for tilts and focus. The Strehl ratio of the assigned point spread function is improved from 0.11 to 0.78. The threshold pulse energy of laser-induced optical breakdown in water is lowered from about 3.0 to about 1.3???J measured at the eye model entrance. After laser cutting of a synthetic foil placed 300???m in front of porcine retinal tissue with the corrected system, postoperative three-dimensional OCT imaging showed no lesions in the tissue. Our results corroborate that AO and OCT will be two essential assistive components for possible clinical systems for fs-laser­based surgery in the posterior eye.